iHealth BP3 User Manual - Page 6

Browse online or download pdf User Manual for Blood Pressure Monitor iHealth BP3. iHealth BP3 12 pages. Fully automatic arm cuff electronic blood pressure dock
Also for iHealth BP3: Operation Manual (11 pages), Quick Start Manual (2 pages)

Print Page

10. This device requires a medical AC adapter with an output of DC 5.0V that complies with IEC 60601-1/UL 60601-1 and IEC

60601-1-2 such as OH-1048A0501000U2(input: 100-240V, 50/60Hz; output: DC 5V, 1.0A). Please note that the monitor jack

size is USB Micro B. The USB jack should be used for charging only.

This Monitor is designed for adults and should never be used on infants, young children, pregnant or pre-eclamptic

patients. Consult your physician before use on children.

This product might not meet its performance specifications if stored or used outside the specified temperature and

humidity ranges.

Please do not share the cuff with any infectious person to avoid cross-infection.

BATTERY HANDLING AND USAGE

• When the monitor is connected to the mobile device, the battery charge will be displayed on the mobile device. If the power is

less than 25%, please charge the battery. The monitor will not work until the battery has enough power.

• When the monitor needs charging, please connect the monitor to a power source. The monitor can work normally while

charging.

• You should charge the battery when the battery is less than 25% charged. Overcharging the battery may reduce its lifetime.

• When in charging mode, the LED on the device will be displayed with different colous indicating the charging status. See the

table below for details.

Monitor Status

Charging

Fully charged

Low battery

Abnormal state

Do not change the battery. If the battery can no longer be charged, please contact Customer Service.

Overcharging the battery may reduce its lifetime.

Lithium battery replacement by inadequately trained personnel could result in a hazard such as a fire or explosion.

Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC adapter is abnormal, please

change the adapter.

Do not pull out the adapter when you are using the monitor.

Do not use when charging.

The monitor, cable, battery and cuff must be disposed of according to local regulations at the end of their usage.

Note: Battery life and charge cycles vary by use and settings.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

Low Battery

Battery is less than 25%

Blood pressure is outside of measurement

range

Display reads

Arm or monitor was moved during test

"ERROR"

The cuff does not inflate properly or

pressure falls quickly during test

The cuff was not properly applied

Display reads

The cuff position was not correct or it was

not properly tightened

an abnormal

result

Body posture was not correct during testing

Status Indicator

Flashing green light

Steady green light

Flashing red light (for a few seconds)

Steady red light

SOLUTION

Charge the battery

Retest and contact your health professional if blood

pressure measurement is still outside of normal range

Retest, make sure not to move your arm or the monitor

Review the cuff application instructions and retest

Review body posture instructions and retest