iHealth BP5 Owner's Manual - Page 16

Browse online or download pdf Owner's Manual for Blood Pressure Monitor iHealth BP5. iHealth BP5 17 pages. Wireless blood pressure monitor
Also for iHealth BP5: Quick Start Manual (4 pages), Owner's Manual (13 pages), Quick Start Manual (5 pages)

Print Page

Conducted RF

IEC

3 Vrms 150

61000-4-6

kHz to 80 MHz

Radiated RF

3 V/m 80 MHz

IEC

to 2.5 GHz

61000-4-3

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures, objects

and people.

a) Field strengths from fixed transmitters, such as base stations for radio

(cellular/cordless) telephones and land mobile radios, amateur radio, AM and

FM radio broadcast and TV broadcast cannot be predicted theoretically with

accuracy. To assess the electromagnetic environment due to fixed RF

transmitters, an electromagnetic site survey should be considered. If the

measured field strength in the location in which the MONITOR is used exceeds

the applicable RF compliance level above, the MONITOR should be observed to

verify normal operation. If abnormal performance is observed, additional

measures may be necessary, such as re-orienting or relocating the MONITOR.

b) Over the frequency range 150 kHz to 80 MHz, field strengths should be less

than 3 V/m.

For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

3 V

3 V/m

Recommended separation distances between

recommended separation distance

calculated from the equation

applicable to the frequency of the

transmitter.

Recommended separation distance：

2 .

3 .

Where P is the maximum output power

rating of the transmitter in watts

(W) according to the transmitter

manufacturer and d is the

recommended separation distance in

meters (m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey,

should be less than the compliance

level in each frequency range.

Interference may occur in the

vicinity of equipment

marked with the following symbol:

Table 4

80 MHz to 800 MHz

800 MHz to 2.5 GHz