Galaxy Press GS-205B Plus Operation Manual - Page 8

Browse online or download pdf Operation Manual for Power Tool Galaxy Press GS-205B Plus. Galaxy Press GS-205B Plus 13 pages.

Print Page

6.Printing And Pressing

Once your equipment has reached the designated start temperature:



Position mug and application and proceed to press.



This procedure will start the automatic timing process.



Please note machine will heat up from start temperature to printing temperature



then time starts to count down.

The timer will automatically count down to zero then circuit board will alarm when



the press cycle is complete.

The timer will automatically re-set and you are ready to continue with the next



application.

7.1 Press "set" button for 4 seconds to

enter into second level menu.Display

as below.(see figure 7.1)

7.3, press up and down button to set

value at 0 or 1, 0 for celsius, 1 for

Fahrenheit.

7.1

7.2 Press "set" button to select "SL2"

mode(See figure 7.2)

7.4 Press "set" button 4 seconds to quit.

7.2