High Lifter Signature Series Installation Instructions Manual - Page 11

Browse online or download pdf Installation Instructions Manual for Automobile Accessories High Lifter Signature Series. High Lifter Signature Series 12 pages. Yamaha wolverine 850 x2/x4

Print Page

Read before Installation

This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender clearance.

Purchasers should be aware that use of this product may increase the frequency of required maintenance, part

wear, and will raise the center of gravity on your ATV and/or RUV, increasing risk of roll-over, injury and

death on all types of terrain. It is your responsibility to always inform other operators and passengers of this

vehicle about the added risks.

High Lifter Products, products are designed to best fit users ATV/RUV under stock conditions. Adding,

modifying, or fabricating any OEM or aftermarket parts will void warranty. High Lifter Products, products

could interfere with other aftermarket accessories. If the user has aftermarket products on machine, contact

High Lifter Products to verify that they will work together. Adding aftermarket suspension components

and/or more aggressive tires can cause breakage of other OEM driveline components such as differentials,

axles or drive shafts.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve

stability of the ATV and/or RUV. Riders should be advised that the handling characteristics of a taller ATV

and/or RUV are different and require extra care when riding, particularly on side hills or off-camber situations.

If you further raise the center of gravity by adding taller tires, heavy loads to racks or seats, or by any other

means, the ATV and/or RUV must be operated with even more care, at slower speeds and on relatively flat

ground. All turns should be done at a slow speed, even on level ground.

Operation of an ATV and/or RUV with or without modified suspension components, while or shortly after

consuming alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death. This risk is

compounded if the rider does not wear an approved helmet and other safety gear. High Lifter urges that all

approved safety gear be worn when riding an ATV and/or RUV as a driver or passenger.

By purchasing and installing High Lifter Products, products, user agrees that should damages occur, High

Lifter Products will not be held responsible for loss of time, use, labor fees, replacement parts, or freight

charges. High Lifter Products will not be held responsible for any direct, indirect, incidental, special, or

consequential damages that result from any product purchased from High Lifter Products. The total liability of

seller to user for all damages, losses, and causes of action, shall not exceed the total purchase price paid for the

product that gives rise to the claim.

Dealers and other Installers

You are responsible for informing your customer and end user of the information contained above and the

increased potential hazards of operating an ATV and/or RUV equipped with modified suspension

components. If you install any suspension modifying components, it is your responsibility to also install the

warning label prominently in view of the driver and in prominent view of the driver and passenger on RUVs

and multi-passenger ATVs. They should also be instructed to notify anyone operating the vehicle, as well as

any passengers, that said vehicle is modified.

As discussed above, it is critically important that they be instructed in the need for slower speed operation,

regardless of terrain, after this lift kit is installed.