iHeat Roof Mount Solar Hot Water Systems Installation Manual - Page 13

Browse online or download pdf Installation Manual for Water Heater iHeat Roof Mount Solar Hot Water Systems. iHeat Roof Mount Solar Hot Water Systems 15 pages.

Print Page

SECTION 3

Local codes including but not limited to AS/NZS 3000:2007 must be adhered to for all electrical work

and be undertaken by a licenced electrician. The electric element has a capacity of 2.4kW, paired with

a thermostat to control the water temperature of the tank. When the water temperature in the tank

reaches the normal setting 60°C, the thermostat will automatically disconnect & prevent overheating.

The thermostat has a unique internal fuse protection that is designed especially for Solar Hot Water

systems. The internal fuse is extra protection against any electrical malfunction & if the fuse activates,

the thermostat will need to be replaced. The Solar Thermostat has an auto-reset-over-temperature

cut-out for high solar contribution days & will automatically self-reset once the temperature drops

below the maximum setting of 70°C.

The iHeat storage tank has a dedicated port for entry into the electrical provision, this is clearly

marked by the supplied sticker on the external casing.

Installation Manual - Roof Mount Solar Hot Water - August 2017

Electrical Connections

Important

This drain hole shall

not be used as a cable

entry port. To do so will

void the warranty of

the system. Under no

circumstances shall the

drain hole be obstructed

or modified in anyway.

Incoming wiring shall be terminated as

per Australian Standards & weather-proof

cover shall be reinstalled after testing of

the circuit by qualified personal. Under no

circumstances shall the circuit be tested

under load without the system being full

of water.

Provision for approved

weather-proof

connection as per

Australian Standards

1300 829 118

i-heat.com.au