high pointe EM925AWW Instruction Manual - Page 9

Browse online or download pdf Instruction Manual for Microwave Oven high pointe EM925AWW. high pointe EM925AWW 17 pages.

Print Page

Countertop Installation

Remove all packing material and accessories.

Examine the oven for any damage such as

dents or broken door. Do not install if oven is

damaged.

Installation

Select a level surface that provide

enough open space for the intake

and/or outlet vents.

12 inch(30cm)

3.0 inch(7.5cm)

OPEN

3.0 inch(7.5cm)

A minimum clearance of 3.0 inches

(7.5cm) is required between the oven and

any adjacent walls. One side must be open.

(1) Leave a minimum clearance of 12

inches (30cm) above the oven.

(2) Do not remove the legs from the

bottom of the oven.

For Built-in kits:

a.Model number and brand of built-in kit:KITR2501B,HIGH POINTE

b.MWO model number and brand which employ built-in Kit:EM925AWW,HIGH POINTE

IMPORTANT: This Built-In Kit is ONLY For Use With HIGH POINTE Microwave Ovens

Model EM925AWW Where This Built-In Kit, Model KITR2501B Is Specified On .

The Back Of The Unit And In The INSTRUCTION MANUAL.

Cabinet: Remove any protective film found

on the microwave oven cabinet surface.

Do not remove the light brown Mica cover

that is attached to the oven cavity to

protect the magnetron.

(3) Blocking the intake and/or outlet openings

can damage the oven.

(4) Place the oven as far away from

radios and TV as possible.

Operation of microwave oven may

cause interference to your radio or TV

reception.

2. Plug your oven into a standard household

outlet. Be sure the voltage and the

frequency is the same as the voltage

and the frequency on the rating label.

WARNING: Do not install oven over a

range cooktop or other heat-producing

appliance. If installed near or over a heat

source, the oven could be damaged and

the warranty would be void.