Autool CT500 User Manual - Page 10

Browse online or download pdf User Manual for Test Equipment Autool CT500. Autool CT500 17 pages. Gdi fuel injector cleaner & tester

Print Page

①

②

③

④

⑤

⑥

Top-in fuel injector installation diagram

Oil outlet pipe

Top oil inlet connector

Upper plate seat

Lock nut

●

Select the top oil inlet connector from the accessories and

install it into the oil separator.

●

Install the fuel injector in the forward direction (apply a little

grease on the "O" ring of the fuel injector)

●

Put the horizontal end of the oil separator and the fuel injector

on the upper plate seat, and tighten the two ends with the

locking rod. Ready to test.

Methods And Steps

02 Idle Speed Test

Confirm that the injector to be tested has been installed

●

properly and the signal wire has been plugged in.

●

Select "02 Idle Speed Test".

●

Press the function setting key to set the working time and pulse

width.

●

Press the start button to start work.

Glass measuring cylinder

⑦

⑧

Oil rail

Injectors

Lock pole