Autool SDT 202 Manual
Browse online or download pdf Manual for Smoke Alarm Autool SDT 202. Autool SDT 202 3 pages.
Print Page
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in different countries, the
trademark is
icon and company name mentioned in this manual, they shall all belong to AUTOOL and its
other affiliated company, in other countries without the registration yet of these trademark,
service logo, domain name, icon and company name of AUTOOL, here we announce they
are owned by AUTOOL. Any company or person shall not use the trademark, service logo,
domain name, icon and company name of AUTOOL before getting approved by AUTOOL
with written certificates. Please visit our website www.autooltech.com or email to
[email protected] to contact us.
1. Caution
Non- technical person shall not change, disassemble or repair the product, otherwise
all losses caused by this shall be bared by the user himself.
This product is powered by electricity and should not be used as a toy for children.
To avoid short circuit, do not immerse the product in water or other liquid.
Please try to use the power supply and power cord supplied by manufacturer as
standard.
Please do not expose this product to strong light or high temperature when it's not at
use.
Keep away from smoke-sensitive parts for leak detection.
When you use this detector the first time, please fill 20-30ml oil, not beyond this
range.
Fresh oil can be filled only when the smoke is light, do not add test oil excessive to the
volume of the measuring bottle at one time, 15ml each time will be good enough. Otherwise
the smoke outlet equipment will be affected.
Before filling fresh oil, please pour out the old remaining oil in the detector.
Please replace the detector oil regularly.
Detector oil selection : Liquid paraffin and baby oil are all OK. But please make sure
there is no water inside, and sticky liquid is forbidden.
The test equipment has a temperature protector. If the machine is operated
continuously for a long time, it will automatically stop and protect after overheating. At this
time, the air pump works normally, the heating system stops working, and when the
temperature drops to a reasonable temperature, the equipment resumes normal operation.
If you need to work continuously, after 15 minutes of work, the equipment shall be shut
down for 3-5 minutes.
User can use strong airflow for the outside of the device to cool down, but do not
directly use the liquid to dissipate heat.
2. Getting Started
AUTOOL SDT 202 is a professional auto pipe leak detect tool. It will help us position
leakage on any pipe system quickly and exactly,such as EVAP system,Intake system,
. With regard to the other trademark, service logo, domain name,