Autool CT-200 Manual - Page 13

Browse online or download pdf Manual for Diagnostic Equipment Autool CT-200. Autool CT-200 18 pages. Injector cleaner & tester
Also for Autool CT-200: User Manual (14 pages), User Manual (14 pages)

Print Page

Remove the hose and let the engine back to its normal condition.

11) Turn on the engine and run it for 2-3 minutes under high speed, and

check if there is any leakage occurs.

Note：

1) The Non-dismantle cleaning fluid is inflammable, so please take care to

avoid any hurt.

2) Make sure that all the connections are in good condition before

performance the cleaning.

4.1 Tidy

Step 1: Shut down the power supply.

Step 2: Put the test and cleaning fluid back to the original bottle, and

clean the machine with dry soft cloth.

Step 3: The testing fluid in tank should be put back to original bottles for

preservation.

4.2 Maintenance

Exchange Cleaning Fluid

After being used for long time, the fluid must be changed to avoid that

the

injector is blocked by the impurity.

Exchanging Process

Step 1: Remove the fluid-release screw cap to let all the liquid out.

Step 2: Pour some new fluid to wash the inside and then release it.

Step 3: Fixthe screw cap on, and add two bottles of new cleaning fluid.

IV Tidy and Maintenance

- - 13 - -