Autool CT-200 User Manual - Page 3

Browse online or download pdf User Manual for Diagnostic Equipment Autool CT-200. Autool CT-200 14 pages. Injector cleaner & tester
Also for Autool CT-200: Manual (18 pages), User Manual (14 pages)

Print Page

Pull the hand brake in testing and place the transmission in

neutral while blocking the front wheel.

Please wear safety glasses when handling the machine, but

not the daily glasses .

When disconnecting the fuel pipe joint under pressure, use a

towel to cover the joint to prevent the fuel bursting forth and

causing fire.

The main unit of the device uses the test solution, and the

cleaning liquid is used for cleaning. The ultrasonic cleaning

needs a special ultrasonic cleaning liquid, if user does not

have it, it can be replaced with a cleaning liquid equipped with

this equipment.

Note:

This manual describes the structure, functional characteristics

and operation methods of the CT 200 injector cleaning detector in

detail.

A brief description of the precautions, maintenance, and

abnormal handling in use.

Product Introduction

Welcome to the CT200 / CT150 injector cleaning detector

manufactured by Shenzhen Accidental Technology Co., Ltd.. The

CT200/ CT150 is a mechatronic product combined ultrasonic

cleaning technology and microprocessor oil pressure control

cleaning detection technology. The CT200/ CT150 can simulate

various working conditions of the engine, clean and inspect the

fuel injector of the car, and can also clean and disassemble the

fuel injector and the fuel supply system.

functions

Ultrasonic cleaning: To perform simultaneous cleaning on

several injectors and to remove the carbon deposits on the

injector completely.

Uniformity/Sprayability test: To test the uniformity

injecting amount of each injector, and to monitor the spraying

status of each injector with the help of backlight. This test is

also for reverse flush.

Leakage test: To test the sealing and dribbling conditions of

injectors under system pressure.

Injecting flow test: To check the injecting amount of the

injector in 15 seconds of constant injection.

Automatic test: To test injectors by simulating different

working conditions.

On-vehicle cleaning: The unit is equipped with various

adaptors and couplers that facilitate cleaning on the injectors

on vehicle.

functions

Adopting the powerful ultrasonic cleaning technology, the

equipment offers complete cleaning to the injectors.

Fuel pressure control through microcomputer offers stable

pressure control and large adjustable range, which is suitable

for all EGI vehicles and can help to achieve automatic

cleaning and testing of injectors.

With the help of microcomputer control and digital display, the

equipment makes possible automatic cleaning, testing