Dynaset 90 Installation Manual - Page 3
Browse online or download pdf Installation Manual for Water Pump Dynaset 90. Dynaset 90 16 pages. Hydraulic variable displacement pump
1.
GENERAL
DYNASET hydraulic variable discplacement pumps are designed for open circuits in
mobile hydraulics and works according to the swash plate principle.
Features:
• Optimized power-to-weight ratio
• High self-suction speed
Wide range of applications:
• Machines for forestry and agricultural purposes
• Cranes and lifting equipment
• Trucks
DYNASET hydraulic variable discplacement pumps operate according to the bent axis
principle. They adjust the geometric delivery volume from zero to maximum. As a
result they vary the volumetric flow that is provided to the loads.
DYNASET hydraulic pumps can be equiped with a DYNASET LS-0 noise reducing block.
The LS-0 block is optional accessory available by request. The LS-0 block reduces noise
when pump is running freely without load. It increases the efficiency and recudes
stress on the base machines engine when the pump is running on idle.
The LS-0 block is installed between hydraulic pump and the pump controller. It is
available for both 12V and 24V systems by request.
Dynaset Oy | Menotie 3, FI-33470 Ylöjärvi, Finland | tel: +358 3 3488 200 | [email protected] | www.dynaset.com
HYDRAULIC VARIABLE DISPLACEMENT PUMP
INSTALLATION GUIDE
3