Autool CT-200 User Manual - Page 2

Browse online or download pdf User Manual for Service Equipment Autool CT-200. Autool CT-200 14 pages. Injector cleaner & tester
Also for Autool CT-200: Manual (18 pages), User Manual (14 pages)

Autool CT-200 User Manual
Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in
different countries, the trademark is
the other trademark, service logo, domain, icon and company
name mentioned in this manual, they shall all belong to AUTOOL
and its other affiliated company, in other countries without the
registration yet of these trademark, service logo, domain name,
icon and company name of AUTOOL, here we announce they are
owned by AUTOOL. Any company or person shall not use the
trademark, service logo, domain name, icon and company name
of AUTOOL before getting approved by AUTOOL with written
certificates. Please visit our website www.autooltech.com or
email at [email protected] to contact us.
Safety War ning
Please read this manual carefully before using the instrument
for proper operation.
Be careful with the high temperature parts of the engine and
machine.
Please don't use the power cord if it is damaged. Please
check it before using the equipment if the equipment falls or is
damaged.
Do not hang the power cord alongside the side of the table,
chair or counter, and do not expose the power cord to high
temperature.
For a power cord extension, the extension cord should be
higher or equal level as the original equipment's power cord,
otherwise it will be over heated.
.With regard to
1
Do not plug the power cord in socket when the device is not
being used.
Do not pull the plug by pulling the cord, remove the power
plug instead.
Allow the unit to cool down completely before storing the unit
and wrap the cord.
To prevent fire, do not put equipment near to open containers
with flammable liquids (gasoline).
Ensure the ventilation when the fuel engine is under
operation.
The instrument should be placed in a well-ventilated room
without direct sunlight, and the "No Fireworks" and "Flame-
able Hazard Warning" signs should be posted.
The operator's hair, clothing, fingers or other parts of the body
should be kept away from the operating parts of the
equipment.
To prevent electric shock, do not touch the working equipment
in wetness or operate the equipment in the rain.
Please operate the device as described in the manual. Use
accessories recommended by the manufacturer.
In the case where the ultrasonic cleaning bath is not filled with
cleaning liquid, it is forbidden to open the ultrasonic system,
otherwise the ultrasonic equipment will be damaged.
The equipment case must be grounded.
Vehicle exhaust contains a variety of toxic and harmful gases
(such as carbon monoxide, hydrocarbons, nitrogen oxides,
etc.), so please keep good airflow when the machine is
working, preferably outdoor.
2