High Resolution Technologies UDC-400 User Manual - Page 5
Browse online or download pdf User Manual for Controller High Resolution Technologies UDC-400. High Resolution Technologies UDC-400 7 pages. Universal device controller
Print Pagecommands linked to outgoing commands seen to the right.
The Web Server allows remote web HTML access to UDC controllers or custom controller templates. This feature is
designed to extend the points of control to any machine with a web browser including mobile devices such as iPhone,
iPad, any PC or MAC, Android devices, Windows Mobile devices or any type of touch screen tablet or slate with a web
browser and network connectivity such as WiFi or LAN.
Our web server is a fully customizable and flexible technology that allows unlimited creativity to access Universal
Device Control through different control surfaces and interfaces. To design your own web pages simply design a UDC
Custom Controller, design and Listen & Learn Controller or use a UDC-400 controller. All button positions and images
are displayed in web browsers just like in the UDC software.
By pressing or clicking buttons through the web browser that is remotely connected to UDC on a different computer
commands are then sent from the computer running UDC software to your devices.
When using the Web Server feature make sure the Web Server is running. You should see text in the title bar
under Your Ips that says Web Server Running... and remember that the web server does not start automatically
on restart of UDC software and must be started manually.
Matrix Router Functions and U-RCP
This feature gives you the ability to assign buttons as a Matrix Router function in order to build an XY (input/output)
Remote Control Panel (RCP) for a matrix router. This function is not specific to one router and can be used with any
type of switching matrix router. This is a generic XY function that does not send a command until you press a button
assigned as a Take or Autotake button. The Take or Autotake button holds the information about which device/router to
send the switch command to. This allows you to build a Universal Remote Control Panel (U-RCP) for matrix routers
High Resolution Systems
Control Systems and Solutions
7111 Dixie Highway #151
Clarkston, MI 48346
www.HighResolutionSystems.com
To build a Protocol Translation table start in the controllers
windows go to the IP \ RS232 \ Listen and Learn tab and choose
a protocol type from the drop down list in the Protocol Translation
section as seen to the left.
Web Server
To connect to the software first start the Web Server by selecting start in the Web
Server drop down menu in the upper left next to the File drop down menu. Next
find the ip address of the computer running UDC which is displayed at the top of
the software then type that ip address into the browser. Turn off all firewalls and
make sure the browser machine or computer has connectivity with the UDC
computer which can be done by sending a ping command the UDC computer
from the browser computer in the cmd.exe prompt in any version of
Windows. The ping command is "ping xxx.xxx.xxx.xxx " where the
xxx.xxx.xxx.xxx is the ip address of the UDC computer. See the example
ping command and note that you ip is most likely not the same as the ip
show in the cmd window.