Autopage C3-RS-603 Operation Manual - Page 2

Browse online or download pdf Operation Manual for Remote Starter Autopage C3-RS-603. Autopage C3-RS-603 13 pages. Professional remote car starter & keyless entry system with two-way serial port data link

Print Page

SYSTEM OPERATIONS:

WARNINGS:

As with any product that performs automatic functions, there are certain safety

precautions that you must practice and be aware of.

1. Keep the transmitter out of children's reach.

2. Do not leave anyone in the vehicle while running on remote control.

3. Alert servicing personnel that the vehicle can be started automatically.

4. Do not start the vehicle by remote while it's in an enclosed area or garage.

5. Always apply the parking brake and lock the vehicle as you exit the vehicle.

6. The vehicle windows must be rolled up.

7. Should the unit malfunction, disconnect the fuse until the problem is corrected.

8. The use and operations of this system is the sole responsibility of the operator.

9. Some areas may have local ordinances that prohibit leaving a vehicle running

on public streets.

10. THIS DEVISE CANNOT BE USED IN ANY STANDARD TRANSMISSION

VEHICLE. FOR AUTOMATIC TRANSMISSIONS ONLY!

Standard XT-33, 5 Button remote

XT-33

Transmitter

Button

Lock Doors

Unlock Doors

Trunk Release (Channel 3)

Activate The Remote Start

Stop remote start operation

Switching code For 2nd Car

Operation.

The first push of the

second push will stop the engine.

Miniature start only transmitter. For normal use with standard XT-33, Use the

unlock button before entering the vehicle.

OPTIONAL: XT-11 Ultra Miniature Remote is for

start only.

This optional remote can be used in applications where the factory

keyless entry system is the main source for arming/locking and

disarming/unlocking the vehicle. For example, vehicles with the

factory smart key/ "push button" start or one-piece remote with key, an

XT-11 Ultra Miniature remote may be purchased for remote start and

unlock only applications. This ultra small remote may be preferred if

your factory remote is integrated within your key.

System Function

button will send an unlock signal to the doors and the

This is used in the optional XT-11 Ultra

Remark

Press and Hold for 2 seconds

Push twice to start

Push Twice to stop engine

For regular remote transmitter

Only