Autopage RS-602 Installation Manual - Page 12

Browse online or download pdf Installation Manual for Remote Starter Autopage RS-602. Autopage RS-602 16 pages. Professional remote car starter
Also for Autopage RS-602: Operation Manual (8 pages)

Print Page
II
FEATURE "
" PROGRAMMING:
1 Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in the 'OFF' position.
2 Push the Programming switch 2 times and hold it until the LED turns on and (*) two chirps with a long chirp is heard
then release the Programming switch. You are now in the feature 'II' programming mode.
3 Press and release the desired transmitter button icon corresponding to the feature you want to program.
(*) The Horn must be connected to hear the programming chirps.
Press
One Chirp /
Transmitter
LED one pulse
Button
Factory Default
Setting
Gasoline Engine
1.
20 minutes run time
2.
H2/2 White wire =
+
3.
Constant Parking
Light Output
Door Lock before
+
4.
start
5.
0.8-second Door lock
& Unlock.
Five chirps= 0.8 second lock, dbl 0.8 second unlock
Six chirps= dbl 0.8 second lock, 0.8 second unlock
Exit
: Turn Ignition to the 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
III"
FEATURE "
PROGRAMMING:
1. Turn the Ignition switch 'ON/OFF' 3 TIMES and stay in the 'OFF' position.
2. Push the Programming switch 3 times and hold it until the LED turns on and (*) three chirps with a long chirp is heard
then release the Programming switch. You are now in the feature 'III' programming mode.
4.
Press and release the desired transmitter button icon corresponding to the feature you want to program.
(*) The Horn must be connected to hear the programming chirps.
Press
One Chirp /
Transmitter
LED one pulse
Button
Factory Default
Setting
Tachometer checking
1.
type.
RPM learning
2.
Start Timer:
0.6-second
Low check level
3.
Second Accessory
+
4.
H3/9 Blue/Black
Exit
: Turn Ignition to the 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
RS-602 REV A.
Two Chirps /
Three Chirps /
LED two pulse
LED three pulse
Diesel Engine and 10
Diesel Engine and 15
seconds warn-up
seconds warn-up
timer
timer
10 minutes run time
30 minutes run time
H2/2 White wire =
Flash Parking Light
Output
Door Lock after start
Door Lock before &
after start * This is
the preferred setting
when using the
optional XT-11 single
button remote
3.5-second Door
0.8 second lock, 0.35
Lock & Unlock.
second unlock
Two Chirps /
Three Chirps /
LED two pulse
LED three pulse
Voltage checking type
Timer checking type
0.8-second (2 chirps), 1.0-second (3 chirps), 1.2-second (4 chirps),
1.4-second (5 chirps), 1.6-second (6 chirps), 1.8-second (7 chirps),
2.0-second (8 chirps), 3.0-second (9 chirps), 4.0-second (10 chirps),
Hi check level
Second Start
H3/9 Blue/Black
12
6/18/2007
Four Chirps /
LED four pulse
Diesel Engine and 20
seconds warn-up
timer
5 minutes run time
Without this
feature
0.8 second dbl
lock,0.8 second dbl
unlock