Autopage RST-1100 Owner's Manual - Page 12

Browse online or download pdf Owner's Manual for Remote Starter Autopage RST-1100. Autopage RST-1100 20 pages. Remote engine starter with alarm system

Print Page

Slow Flash

Armed

Fast Flash

Passive Arming

On (Solid)

Valet Mode

Pause On

Password Lock-Out

C. CHIRP INDICATORS:

Chirp

1 chirp

Arm

2 chirps

Disarm

3 chirps

Ajar Warning

4 chirps

Disarm / Triggered

6 chirps

Car Locator

E. ACTIVE ARMING – LOCK & ARM:

1. Press the

button on the transmitter.

2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The

vehicle door will lock upon arming when interfaced with the security system.

AJAR WARNING: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.

SILENT ARMING: Spin up the

transmitter

and

arm confirmation will be through the vehicles parking lights only.

SENSOR BY-PASS:

Bypass The Zone 4: Spin up the

press the button

or press the

times within 3 seconds. This will arm the security system and

by-pass the zone 4-shock sensor.

The system will chirp one additional time to confirm the sensor bypass mode was activated. The sensor

bypass feature is programmed to activate for one arming cycle only. The security system will return to

normal operation during the next arming cycle.

HIDDEN ALARM FUNCTION (Silent Alarm): Spin up the

and then press the "Hidden Alarm" button or press the

seconds press the

system will arm and with "Hidden Alarm Function" The siren / horn will be silenced

even if the unit is triggered in the armed status. Notification will only be through the

hand held two-way remote.

F. PASSIVE ARMING (Programming Required)

Active arming / disarming is controlling your security system via the remote transmitter. This security

system is equipped with an optional Passive Arming feature which allows the security system to arm 30

seconds after the last door is closed. Operation is as follows.

1. Turn the ignition to the "OFF" position and exit the vehicle.

2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any

door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all of the

vehicle entrances are closed.

3. After 30-second timer has elapsed, the security system will automatically "ARM". The siren will chirp [1]

time and the parking lights will flash [1] time.

PASSIVE ARMING WITH PASSIVE DOOR LOCKING:

The vehicle doors will automatically lock after passive arming cycle has been completed.

PASSIVE ARMING BY-PASS: While the system disarmed, Press the

respond with [1] chirp and LED will turn "ON". The security system will remain in this temporary state for as

RST1000 OP REV.A

Function

switch to the page

buttons at the same time to arm your security system, No chirp sound will be heard,

switch to the page

button on the transmitter two

button to activate the hidden alarm function. The security

2 flashes... pause

Zone 2 / Trigger on Trunk

3 flashes... pause

Zone 3 / Trigger on Door Switch

4 flashes... pause

Zone 4 / Trigger on Shock Sensor

5 flashes... pause

Zone 5 / Trigger on Ignition Switch

D. PARKING LIGHT:

Parking light

1 flash

Arm

2 flashes

Disarm

3 flashes

Disarm / Triggered

12 flashes

Car Locator

Constant On

Under Remote Start

and then press the "Silent Arm" button or press the

and then

switch to the page 1

button first; within 3

Function

button twice, the security will

Jun/22/2009