High Sec Labs FIFE11PH-M Quick Setup Manual - Page 9

Browse online or download pdf Quick Setup Manual for Extender High Sec Labs FIFE11PH-M. High Sec Labs FIFE11PH-M 9 pages. Secure kvm extenders

Print Page
Table of Contents
SECTIONS

SAFETY AND REGULATORY STATEMENTS

Safety Symbols
One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is in the ON position.
Power Off: This symbol indicates the principal on/off switch is in the OFF position.
Protective Grounding Terminal: This symbol indicates a terminal which must be connected
to earth ground prior to making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible damage to equipment, please observe the
following precautions.
•
Do not disable the power grounding plug. The grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
•
Disconnect the power from the product by unplugging the power cord from either the electrical
outlet or the product. The AC inlet is the main disconnect for removing power to this product.
For products that have more than one AC inlet, to remove power completely, all AC line cords
must be disconnected.
•
This product has no serviceable parts inside the product enclosure. Do not open or remove
product cover.
This product is for use with other products that are Listed or Certified by a Nationally Recognized
Testing Laboratory (NRTL).
HSL Secure Extended Isolators Quick Setup Guide
1
2
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSD version
4.0 certification for peripheral sharing switch devices.
Installation Precautions
Note: HSL Secure Extended Isolators are protected with Holographic Tamper-Evident Labels on
the product's enclosure to provide a visual indication in case the enclosure has been opened or
compromised.
Do not connect this product to computing devices that:
•
are TEMPEST computers
•
include telecommunication equipment
•
include frame grabber video cards
•
include special audio processing cards.
WARNING: Peripherals' Warning - For security reasons, this product does not support wireless keyboards. It is
recommended not to connect a microphone or headset to the audio output port.
Security Vulnerability
If you are aware of a potential security vulnerability while installing this product, contact Technical
Support immediately by:
•
Web form: www.highseclabs.com/support/case/
•
•
Tel: +972-4-9591191/2
WARNING: Unit Enclosure Warning - If the unit's enclosure appears disrupted or if all LEDs flash continuously,
remove the product from service immediately and contact Technical Support.
3
9
HDC19956 Rev.1.0