Dynaset HPW-DUST Operating Instructions Manual - Page 16
Browse online or download pdf Operating Instructions Manual for Construction Equipment Dynaset HPW-DUST. Dynaset HPW-DUST 20 pages. High pressure dust suppression systems
Print Page16
If any nozzle's spray form going to be varying or nozzle clogged, the nozzle should detach and flush with clean
water against the working flow direction. Flush suction strainer with water or change it to the new one.
Due to small number of moving parts, in normal operating conditions HPW-pump does not require any other
service, except replacement of sealings or occasionally of water valves, which depends on content of abrasives
in pumping fluid, as well as on cleanliness of hydraulic oil.
Check constantly whether the fluid dropping from pump's leakage detectors is growing and replace sealing in
proper time to exclude intermixing of hydraulic oil and pumping fluid. To enable the easy surveillance, pump
should be kept clean.
Observe also couplings, valves and hoses that they are tight with no bleeding. Clean pump fluid filter and
suction strainer guarantee long components life cycle.
Prior to any cleaning, inspection and service hydraulic system of your carrier machine must be stopped and all
hydraulic fluid circuits depressurized.
WHEN CARRYING OUT ANY DISASSEMBLING OR REPAIR OF HPW-PUMP, ABSOLUTE CLEANLINESS
MUST BE MAINTANED TO ENSURE RELIABLE AND TROUBLE-FREE OPERATION OF YOUR EQUIPMENT.
Conform to waste legislation, regulations and recommendations in waste disposal and waste recycling
issued by local authorities.
1. Precondition:
• Product is permanently useless or beyond repair.
• Before transportation get off all used agent (oil, cooling liquid) and dirty filters.
Items requiring special handling can normally be done by authorized waste management facility,
if not:
• Separating the base materials, iron, copper, steel, electronics, removing paint, polyester resin,
and insulation tape and/or plastics residues from all components.
• This 'waste material' can now be recycled.
2. Deliver the recycling and waste material to waste management facility.
Note! Customer can send the DYNASET equipment for reuse or recycling to the Dynaset Oy or to
other location determinate by Dynaset representative.
• Customer pays shipping cost.
• Equipment must be adequately packed for shipment.
• Shipment documents must contain purchaser's name, contact information, equipment type and
serial number.
HPW-DUST HIGH PRESSURE SUPPRESSION SYSTEMS
PRODUCT DISPOSAL
April 2014 JLe