Autopage C3-RS-915 LCD Operation Manual - Page 9

Browse online or download pdf Operation Manual for Car Alarm Autopage C3-RS-915 LCD. Autopage C3-RS-915 LCD 17 pages. Professional 2-way lcd remote car starter & alarm system with built in temperature & voltage sensor and two-way serial port data link

Print Page

SVMASTER

R. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)

If the vehicles door locks have been interfaced to the security system, the system will automatically lock the

vehicle's doors when the ignition is turned "ON" and /or unlock the vehicle's doors when the ignition is turned

"OFF". (Default setting is "OFF")

S. TRUNK RELEASE (CHANNEL 3) OUTPUT.

Press and hold

T. CHANNEL 4.5.6 TIMER CONTROL OUTPUT.

CHANNEL 4 TIMER CONTROL OUTPUT.

Press the transmitter

Press and hold

LCD remote will show "CH 4" icon flash, then press

Channel 4 is user-programmable timer output. You may program the built-in timer to send a ground signal for

any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the

headlight, power window or sunroof. (Factory defaults setting at momentary output.)

CHANNEL 5 TIMER CONTROL OUTPUT.

Press the transmitter

Press and hold

LCD remote will show "CH 5" icon flash, then press

Channel 5 is user-programmable timer output. You may program the built-in timer to send a ground signal for

any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the

headlight, power window or sunroof. (Factory defaults setting at momentary output.)

CHANNEL 6 TIMER CONTROL OUTPUT.

Press the transmitter

Press and hold

LCD remote will show "CH 6" icon flash, then press

Channel 6 is user-programmable timer output. You may program the built-in timer to send a ground signal for

any time duration from 1 second to 120 seconds. For instance, this timer output may be used to turn on the

headlight, power window or sunroof. (Factory defaults setting at momentary output.)

U. POWER SAVER MODE (Default OFF) * See advanced user mode

Under Menu mode press

ON, while the power save mode, the LCD remote transceiver use "0" current to save the battery power.

Press

button Power save OFF

Exit: Press any button of the LCD remote transmitter to exit "Power Save Mode".

V. POWER ON MEMORY:

This security system is equipped with circuitry that will allow the unit to remember its alarm state if

the power is lost and then reconnected.

W. SECOND VEHICLE SECURITY OPERATION:

Your 5-button remote transmitter can be utilized to control a second vehicles security system, To program the

remote control transmitter to a second vehicle, follow the instructions for Transmitter programming.

* For the standard transmitter (II) is shift button.

Standard Transmitter

1. Prior to pushing any button on the transmitter. Press the Select II button first on the transmitter.

2. Once II button is pressed the LED on the transmitter will illuminate for 3 seconds to indicate the second

transmitter pin code has built-in.

SVMASTER

C3 RS915 REV. O1

button on the transmitter for two seconds to remotely control the trunk release.

and

buttons at the same time to active Channel 4 function.

button of LCD remote until 2 beeps sound , release and re-press

and

buttons at the same time to active Channel 5 function.

button of LCD remote until 2 beeps sound , release and re-press

and

buttons at the same time to active Channel 5 function.

button of LCD remote until 2 beeps sound , release and re-press

button while "POWER SAVE" icon flash, press

to activate channel 4 function.

button

to activate channel 5 function.

button

to activate channel 6 function.

button

http://www.msvmaster.lv

button the

button Power save

http://www.msvmaster.lv