Autopage RF-420LCD Installation Manual - Page 9

Browse online or download pdf Installation Manual for Car Alarm Autopage RF-420LCD. Autopage RF-420LCD 12 pages. Professional vehicle security system

Print Page

VACCUM DOOR LOCK SYSTEM

BROWN WIRE

BLUE WIRE

VIOLET WIRE

405 6-PIN

CONNECTOR

WHITE WIRE

GREEN WIRE

VIOLET / RED WIRE

A. TRANSMITTER PROGRAMMING

Enter:

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON position. Within 15 seconds.

2. Push the Valet switch 2 times and hold in on the 2

then release the valet switch. You are now in the Transmitter programming mode.

Program:

1. Press any button on transmitter 1 until the siren responds with a confirming chirp; the

first transmitter is now programmed.

2. Press any button on the second transmitter until the siren responds with a confirming

chirp; the second transmitter is now programmed.

3. Apply the same procedure to program 3rd and 4th

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps and 3 Parking

Light will confirm exit.

Note: If more than 4 transmitters programmed, the system will only keep the last four

(12v B+)

(GROUND)

PROGRAMMING

push, when a long chirp is heard

LOCK

BROWN

FROM DOOR

GREEN WIRE

TO PUMP

LOCK PUMP