Autopage RF-425LCD Operation Manual - Page 5

Browse online or download pdf Operation Manual for Car Alarm Autopage RF-425LCD. Autopage RF-425LCD 14 pages. Professional vehicle security system

Print Page

1. Light impacts will trigger the warn-away signal. A long chirp from siren/horn.

2. Heavy impacts / Doors open / Hood open / Trunk open / Turning on the ignition switch- All will

trigger the programmed sequence.

The starter disable relay (if installed) prevents the vehicle's starter from cranking. The siren and

parking lights will turn on to alert of an intrusion for 30 seconds. Then the siren will stop and

automatically reset and re-arm. If any the sensors or detectors are still active, the alarm system

will sound a maximum of three-30 second cycles.

Trunk/Hood

Doors

Trigger

Warn-away Trigger

Clear the Flash Icon and Melody Sound: Cycle ignition then press the

button first, within 3 seconds press

time. It will clear the flash icon and melody sound on the LCD screen

transceiver

NOISE ABATEMENT CIRCUIT:

Your system has "Noise Abatement Circuit". It prevents annoying repetitive trigger sequences

due to faulty door pin switches or environmental condition such as thunder, jackhammers, airport

noise, etc. Here's how "Noise Abatement Circuit" works: The alarm triggers five times. Each

time, the same sensor or switch is triggering the alarm. "Noise Abatement Circuit" will interpret

this pattern of triggers as false alarm. After the fifth trigger, "Noise Abatement Circuit" ignores, or

bypasses, that sensor or switch until the other sensor or switch is trigger.

"Noise Abatement Circuit" covers doors (Hood/Trunk) differently: If the alarm is triggered by an

open door for three full cycles, the doors will be bypassed until the trigger ceases.

DRIVER PAGING (For two-way transmitter operation only)

It is useful in the event that someone wants to page the driver of the parked vehicle. With the

ignition switch in the "off" condition, press the

page the driver, one chirp sound shall be emitted from the vehicle and the paging melody

continues sounding from your Remote LCD Transmitter and "

screen.

If the vehicle's door locks have been interfaced to the security system, the system will

automatically lock the vehicle's doors when the ignition is turned "ON" and /or unlock the

vehicle's doors when the ignition is turned "OFF".

Shock

Ignition

Sensor Trigger

Trigger

and

button on the window mount antenna once to

" indication flashes on the LCD

buttons at the same