Autopage RF-320 Installation Manual - Page 9
Browse online or download pdf Installation Manual for Security System Autopage RF-320. Autopage RF-320 12 pages. Professional vehicle security system
Print Page
FEATURE "B" PROGRAMMING:
1
Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in OFF position.
2
Push the Valet switch 5 times (holding in on the 5th push) until two chirps with a long
chirp is heard then release the valet switch. You are now in the Alarm feature 'B'
programming mode.
3
Press and release the transmitter button corresponding to the feature you want to
program.
One Chirp /
Press
LED one pulse
Transmitter
Factory
Button
Default Setting
Pathway
1
illumination
feature "off"
2
Ignition
controlled door
locks &
unlocks
0.8-second
3
Door lock
pulses.
nd
2
Channel
4
Pulsed
5
+
Button =
Silent
Arm/Disarm
H3/8 Gray Wire
6
+
= Trunk
(Channel 2)
Output
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds.
3 long chirps & 3 parking light flashes will confirm exit.
Two Chirps /
Three Chirps /
LED two
LED three pulses
pulses
Parking light
Parking light turns
turns "on" for
"on" for 30-
30- second
second upon an
upon an
unlock signal &
unlock signal
10-second upon a
lock signal.
Ignition
controlled
Ignition controlled
door locks
door unlocks only
only
3.5-second
Double pulse
Door lock
unlock
pulse.
nd
2
Channel
Momentary
rd
Button = 3
Channel Aux.
H3/8 Gray Wire
= Two Step
Door Unlock
Output
9
Four Chirps /
LED four
pulses
Without
ignition
controlled door
locks &
unlocks
Door lock with
"Comfort
Feature"