Dynasty DY-BT63 Installation Instructions & Operating Manual - Page 7

Browse online or download pdf Installation Instructions & Operating Manual for Indoor Fireplace Dynasty DY-BT63. Dynasty DY-BT63 8 pages.
Also for Dynasty DY-BT63: Installation Instructions And Operating Manual (9 pages)

Print Page

Flame button

The fire has four flame effects and a standby, by pressing the flame effect button the unit will cycle

through each condition.

Heater button

Press once turns 650W power on. (Pilot lights illuminated ●○)

Press again turns 1300W power on (Pilot lights illuminated ●●)

Press third time turns heater off. (Pilot lights illuminated ○○)

To Reset the Heater

Your heater includes a protection system that shuts off the heater if it overheats for any reason:

1) Turn unit to off.

2) Wait 5 minutes.

3) Turn on.

●

Remote control functions

In order to protect the product from becoming too hot, there is an 8s delay when turning on the heater;

also there is an 8s delay when turning off the heater fan.

Make sure the batteries are installed properly in the remote control.

The effective range of the remote control is up to 4 meters or 13 feet.

ICON

TITLE

POWER

FLAME

HEATER

TEMP

TIMER

Press once turns appliance and flame effects on. Press

again turns appliance and flame effects off.

The fire has four flame effects, by pressing the flame

effect button the unit will cycle through each effect.

Press once turns 650W power on. (Pilot lights

illuminated ●○)

Press again turns 1300W power on (Pilot lights

illuminated ●●)

Press third time turns heater off. (Pilot lights illuminated

○○)

Digital display shows the TEMP setting 23°C (default),

with 14 settings circle from "OFF", "16°C" to "28°C".

The TEMP will increase by 1°C up to 28°C when

pressed each time.

By pressing the TEMP for 3S, the digital display can

show between °C and °F.

Cycles from OFF, 0.5H, 1H, 2H, 3H, 4H, 5H, 6H, 7H,8H,

to 9H.

FUNCTION