Autopilot APCECOD Manual - Page 4

Browse online or download pdf Manual for Controller Autopilot APCECOD. Autopilot APCECOD 17 pages. Deluxe digital co2 controller

Print Page

Page 3

Button Functions

There are Ten (10) buttons located on the front face that control

the functions. Pressing each button will display a function and/or

current setting(s) in the green LED window.

Several small green LED lights or status indicators located on

the front panel will light up to identify the selected setting.

Up - Press button to increase setting

Down - Press button to decrease setting

Enter/Reset - Press button, hold for 3 seconds to enter new

setting and to reset the Min/Max values.

CO2 buttons

CO2 PPM SETTING - Press button to display and/or change CO2

Parts Per Million (PPM) setting.

CO2 DEAD BAND - Press button to set the CO2 dead-band set-

point. (The amount of PPM change to affect the CO2 On / Off)

FUZZY LOGIC - Press button to select Fuzzy Logic mode or CO2

generator mode..

CO2 FUNCTION - Press button to select the photocell function.

CO2 MODE- Press button to select the CO2 mode, to increase or

decrease CO2 levels..

CALIBRATE CO2 PPM - Press button to re-calibrate the CO2

sensor.

Special buttons

CO2 Min / Max - Press this button repeatedly to recall the stored

high and low recorded levels for CO2. Press and hold the

Enter/Reset button while the recorded value is displayed to reset

the Min/Max values.

APCECOD