ACTOP VDP311 User Manual - Page 4

Browse online or download pdf User Manual for Intercom System ACTOP VDP311. ACTOP VDP311 8 pages. Video intercom and doorphone system

Print Page

You can use any 4-core cable to make these connections, but screened and/or

armoured cables are most secure. To connect additional monitors you will need

to use 5-core cables to prevent interference between the monitors – only the

monitor that accepts the call will be in communication with the caller. It is

possible to use 4-cores for the signal and the screen for the ground connection.

The monitors and door cameras are each provided with terminals and a short

cable with appropriate terminal connectors already attached. Use screw-type

terminal blocks to connect to these, or use a soldered joint if you are suitably

experienced. You can also purchase lengths of cable with terminal connectors

already attached.

Connect similar colours together. That is, connect red to red, blue to blue, yellow

to yellow and white to white. The green wire does not need to be connected

(unless you have additional monitors or additional doors) and should be on the

left of the terminal block when looking at the rear of the unit as in the image in

section 1.

A power adaptor must be plugged into the monitor. This will also supply power

to the door camera unit.

The (optional) electronic lock is connected to the door camera unit, using a twin

cable.

Interface Cable Description:

1. Yellow (Video)

2. Black (Ground)

3. Blue (Audio)

4. Red (+12V DC)

P a g e