DCN DCS-3950-26C Installation Manual - Page 11
Browse online or download pdf Installation Manual for Network Router DCN DCS-3950-26C. DCN DCS-3950-26C 20 pages. Dcs-3950 series dcs-3950-10c series dcs-3950-28c series
Print Page
DCS-3950 series Installation manual
Chapter 2 Hardware Installation
2.1 Installation Notice
To ensure the proper operation of DCS-3950 series and your physical security,
please read carefully the following installation guide.
2.1.1 Environmental Requirements
The switch must be installed in a clean area. Otherwise, the switch may be damaged
by electrostatic adherence.
Maintain the temperature and the humidity within the set environment.
The switch must be put in a dry and cool place. Leave sufficient spacing around the
switch for good air circulation. The switch should be cushioned on desktop or other
switch.
The switch must work in the right range of power input.
The switch must be well grounded in order to avoid ESD damage and physical injury
of people.
The switch should avoid the sunlight perpendicular incidence. Keep the switch away
from heat sources and strong electromagnetic interference sources.
The switch must be mounted to a standard 19'' rack or placed on a clean level
desktop.
2.1.1.1 Dust and Particles
Dust is harmful to the safe operation of DCS-3950. Dust can lead to electrostatic
adherence, especially likely under low relative humidity, causing poor contact of metal
connectors or contacts. Electrostatic adherence will result in not only reduced product
lifespan, but also increased chance of communication failures. The recommended value
for dust content and particle diameter in the site is shown below:
Max Diameter (µm)
Max Density
(particles/m³)
Table 2-1 Environmental Requirements: Dust content
In addition, salt, acid and sulfide in the air are also harmful to the switch. Such
0.5
1
5
5
1.4×10
7×10
2-1
Chapter 2 Hardware Installation
3
5
5
2.4×10
1.3×10
5