Dynatech V-7000 User Instructions - Page 4
Browse online or download pdf User Instructions for Amplifier Dynatech V-7000. Dynatech V-7000 16 pages. Professional
Print Page
- 1. User Instructions
- 2. Table of Contents
- 3. Safety Precautions
- 4. Introduction
- 5. Front Panel
- 6. Rear Panels
- 7. Inputs
- 8. Outputs
- 9. Speakon Output Connector Assembly
- 10. Operating Modes
- 11. Limiter
- 12. Short Circuit Protection
- 13. Thermal Protection
- 14. Amplifier Features
- 15. Subwoofer and Speaker Setup
- 16. Specifications
Important Precautions
• T o reduce the risk of electrical shock or fire, do not expose this
unit to rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of elec-
trical shock and fire in case of an internal short.
• Disconnect main power before making any type of connection
• Do not remove the cover under any conditions. There are no
user serviceable parts inside.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this unit in an area that will allow
proper ventilation. Allow about 6" (15cm) between this device
and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit's main
power.
• Always mount this unit in a safe and stable manner.
• Power cords should be routed so they are not likely to be
walked on, pinched by items placed upon or against them.
• Cleaning -The outside of the unit should be wipe down with a
soft cloth and mild cleaner when needed.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into the unit.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Introduction: Congratulations and thank you for purchasing
the DynaTech V-5000/V-7000 amplifier. This amplifier is a repres-
entation of DynaTech's continuing commitment to produce the best
and highest quality products all at an affordable price. Please
read and understand this manual completely before attempting to
operate your new amplifier. This booklet contains important in-
formation concerning the proper and safe operation of your new
amplifier.
Unpacking:Every
V-5000/V-7000
thoroughly tested and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that
may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your unit for any damage and be
sure all accessories necessary to operate the unit has arrived
intact. In the event damage has been found or parts are missing,
please contact your dealer for further instructions.
Installation: This amplifier is designed to mount into a standard
19" rack. The front panel provides four holes used to screw the
unit into a rack. The unit also provides a way to rear mount the
unit into a rack for added security. Rear mounting the unit is espe -
cially recommended for this amplifier if the unit is to mounted into
a mobile rack.
page 4
Introduction
amplifier has been