Dynatech QUASAR Instructions For Use Manual - Page 6

Browse online or download pdf Instructions For Use Manual for Lifting Systems Dynatech QUASAR. Dynatech QUASAR 14 pages. Overspeed governor

Print Page

INSTRUCTIONS: QUASAR Cod: DYN 48.1.07

Fecha: 04/12/2017 Revisión: 07

The tensioning pulley is located in the hoistway pit.

The rope is to be tightened enough for the governor to be able to transmit the force required to trip the safety gear.

Should the rope become untightened or break, there is a de-tensioning contact that would interrupt the safety line in

any of the cases.

NB. The Quasar governor uses special ropes. Carefully read the Compact tensioning pulley 126 manuals for their

proper installation.

OVERSPEED CONTACT

The governor incorporates an overspeed contact (1) as displayed in the image on the right.

In this governor, electrical tripping occurs just before the governor interlocks. Thanks to a return mechanism in the

interlocking system, the electrical contact does not require to be manually reset. The contact is automatically reset.

This means that, once the governor and safety gear have been tripped, just unjam the safety gear and the governor

will return to its standby position.

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/