Emerson 2100 Instruction Manual - Page 10
Browse online or download pdf Instruction Manual for Fan Emerson 2100. Emerson 2100 12 pages. Emergency pressure relief vent and manhole cover
Print Page
2100 Series
Parts Ordering
When corresponding with your local Sales Office about
this equipment, always reference the equipment serial
number stamped on the nameplate.
Parts List
Key
Description
1
Base, Carbon steel, 304 Stainless steel
and 316 Stainless steel
2
Cover, Aluminum, Zinc-plated Carbon steel, 304 Stainless steel
and 316 Stainless steel
3
Seal Support, Aluminum, Zinc-plated Carbon steel,
304 Stainless steel and 316 Stainless steel
4
Shield, Aluminum, Zinc-plated Carbon steel, 304 Stainless steel
and 316 Stainless steel
5
Guide, Aluminum, Zinc-plated Carbon steel, 304 Stainless steel
and 316 Stainless steel
6
Seal, Buna-N, Teflon
and Viton
®
7
Stat-O-Seal, 1/4 in. Fluorocarbon, Stainless steel and Viton
8
Flat Washer, 1/4 in., 316 Stainless steel
MATERIAL
Buna-N
Teflon
®
Viton
®
NOMINAL PIPE DIAMETER
16
20
24
Assumptions:
Use of SAE grade 5 bolts or studs or stronger.
No lubricant.
Compressed mineral fiber material or similar
Notes:
If lubricant is used on bolts, apply torque reduction factor listed in Lubricant Table.
For best results hardened steel washers should be used on all cast flange bolted connections.
Teflon
and Viton
are marks owned by E. I. du Pont de Nemours and Co.
®
®
10
®
®
Table 1. 2100 Series Seal Options
16 in.
NE3043037A0
NE3043038A0
NE3043039A0
Table 2. Torque Specifications – Raised Face Flange, Steel Only
NUMBER OF BOLTS
16
20
24
When ordering replacement parts, specify the
complete 11-character part number found in Table 1.
Key
Description
9
Fender Washer, 1/4 x 1 in. O.D., 316 Stainless steel
10
Lock Washer, 1/4 in., 316 Stainless steel
11
Hex Bolt, 1/4 in. - 20 x 3 in., 316 Stainless steel
12
Hex Bolt, 1/4 in. - 20 x 2 in., 316 Stainless steel
13
Hex Nut, 1/4 in. - 20, 316 Stainless steel
14
Eyebolt, 1/4 in. - 20 x 3 in., 316 Stainless steel
15
Nylock Hex Nut, 1/4 in. - 20, 316 Stainless steel and Nylon
16
Roller, Zinc-plated Carbon steel, 316 Stainless steel
17
Weight, "Makes", Zinc-plated Carbon steel
18
Weight, oz./sq. in. or in. w.c., Zinc-plated Carbon steel and
316 Stainless steel
19
Lanyard, Tether or Restraint, 316 Stainless steel
GASKET AND SEAL OPTIONS
Part Number
20 in.
NE3043040A0
NE3043041A0
NE3043042A0
BOLT DIAMETER
in.
mm
1.00
25.4
1.13
28.7
1.25
31.8
24 in.
NE3043043A0
NE3043044A0
NE3043045A0
TORQUE
ft-lbs
N•m
159
216
214
290
253
343