Dynatech YBM Additional Maintenance And Repair Instructions - Page 6

Browse online or download pdf Additional Maintenance And Repair Instructions for Saw Dynatech YBM. Dynatech YBM 10 pages. Mini masonry saw

Print Page

BBM & YBM INSTRUCTIONS [May 2004]

Installing the Motor [Continued]

8. Connect the two white motor field winding wires to the

terminal block in the same location as the black and white

wire coming from the accessory outlet plug.

9. Push the blade guard onto the blade shaft casting housing

and then insert the two screws located at the bottom of the

blade shaft housing casting and tighten.

10. Insert a Phillips head screw driver into the blade guard

screw access holes and align the two screws holding the

blade guard on the cutting head casting and then tighten.

11. Push both blade flanges onto the end of the blade shaft.

Then using a 17mm wrench, turn the blade shaft screw

counter-clockwise and tighten the screw and washer

assembly onto the end of the shaft.

12. Insert the two plastic plugs in the blade guard to protect the

two blade guard mounting screws located under the blade

guard.

Motor replacement complete

NEVER ATTEMPT ANY OF THE INSTRUCTIONS WITH POWER CONNECTED TO SAW!