HighGear Enduro mini User Manual - Page 16

Browse online or download pdf User Manual for Watch HighGear Enduro mini. HighGear Enduro mini 17 pages. Techtrail running wristware

Print Page

TROUBLE SHOOTING BASIC

Your Enduro watch is a very sensitive and sophisticated instrument. If properly cared for

it should last and remain accurate for many years. However, from time to time problems

may occur. It has been our experience that the majority of the problems seen by

consumers with products such as the Enduro are related to dead or dying batteries.

While the estimated life of a fresh battery in the unit is approximately 1 year, this

can be shortened considerably if the backlight feature of the unit is used extensively.

Whenever you are experiencing issues related to the function of the unit, it is

recommended that you install a fresh battery as a first course of action, especially if it

has been more than a half a year since the last time the battery was replaced.

BE AWARE:

Lithium batteries of the type used in this watch are very susceptible to

improper storage. Many times, batteries purchased as new are dead or weak before

they are purchased. Do not assume that batteries in stores are good. If you try a new

battery and problems persist, please try a second battery from another source, just to

be certain.

TROUBLE SHOOTING BASIC

If the battery on the watch unit is failing it may show itself in several ways. Indications

of a weak battery are:

A fading or blank display. Also if the display goes blank when the backlight is operated

and then comes back on when the backlight system turns off.

If the display goes blank when the EL system is operated and then comes back on when

the EL system turns off.

The display of your watch may "freeze" due to static electricity or battery replacement.

If this occurs, remove the battery and re-insert it. This will erase the data in the memory

and reset the watch to factory settings.

Enduro watches are equipped with a display which allow them to be used in a wide

variety of environments. However, if the unit is used in extreme cold (<32°F or 1°C) the

function of the display may be slower than normal. If exposed to extreme heat or cold,

the display may also darken. The display should return to normal once the temperature

returns to normal levels.