Galleon SIGNALCLOCK V2 Installation And User Manual - Page 4

Browse online or download pdf Installation And User Manual for Clock Galleon SIGNALCLOCK V2. Galleon SIGNALCLOCK V2 19 pages.

Print Page

PRE-INSTALLATION

Please remove the plastic sheet from the front of the display before powering the clock on.

Removing this sheet after the clock has been powered up can result in damage to the hardware

due to static build-up.

It is, currently, not possible to obtain the serial number of the clock via the web interface. We,

therefore, recommend taking note of the serial number before mounting the clock to the wall. The

serial number is located on the rear of the clock and will be required by the Galleon Systems

support team for product/warranty verification, should you experience technical issues with your

product.

Galleon's SignalClock requires a connection to a PoE enabled network so it can source power in

compliance with IEEE 802.3af.

PoE is commonly used to power devices such as wireless access points and IP telephones. It is

usually injected into the LAN using either PoE enabled Ethernet switches or a power injector.

Consult with your IT Administrator regarding the PoE equipment on your network.

If your network has a PoE enabled network switch, simply connect the clock to the PoE enabled

port on the switch as per the above diagram. The SignalClock will automatically request and

receive power from the switch that conforms to the IEEE 802.3af standard.

Note: If the site plan requires a significant number of clocks to be powered from a single piece of

network equipment, you should verify that that piece of equipment can deliver the necessary

power. Some PoE enabled switches cannot deliver the full IEEE 802.3af power of 550ma per port

or may require certain power options to do so.

www.galsys.co.uk

galleonsupport.com

SIGNALCLOCK V2 Manual

TEL:

+44 (0) 121 608 4433

FAX:

+44 (0) 121 608 4477