GALLERY 36 Instruction Manual

Browse online or download pdf Instruction Manual for Industrial Equipment GALLERY 36. GALLERY 36 18 pages. Canvas stretching machine

Print Page

Support Page

Introduction

The Canvas Stretching Machine is a fully pneumatic canvas stretcher capable of

stretching original art on canvas, giclee prints and any fabric suitable for stretching. The

following is a list of operating parameters that should be observed to ensure a safe and

efficient stretch:

Safety Precautions

Air Pressure: before applying air to your machine, adjust the regulator at your

compressor to produce 95 psi. If you are using a pneumatic staple gun please be sure to

provide what the manufacturer recommends, this may require you to provide a 2 way

manifold.

All of the air cylinders have been thoroughly operated, tested and held to a very high

standard. The Clamping Bar has a dedicated internal pressure regulator and it is set to a

point that will not exceed the Stretcher Bar pressure by more than 10 psi. This is to

ensure that the canvas is permitted to slip just enough to minimize overstretching. The

operating pressure of the Clamping Bar is preset to 50

: the clamp and stretcher bar move slowly, they are deceptively powerful.

CAUTION

The force behind them can damage your fingers, please ensure that your hands and

fingers are clear of the clamp at all times. DO NOT place your fingers between the

Clamping Bar and Front Plate at anytime.

Instruction Manual

(36" & 60"models)

http://www.youtube.com/user/dweaverframe?feature=mhee

Minimum amount of excess canvas 1.5"

Minimum stretcher width .75"

Maximum stretcher width 2.5"

Maximum supply air 120 psi

Minimum supply air pressure 90 psi

psi....Do Not Adjust This Setting!