Copernicus DCS6 Assembly Manual - Page 13
Browse online or download pdf Assembly Manual for Racks & Stands Copernicus DCS6. Copernicus DCS6 13 pages. Document camera stand
Also for Copernicus DCS6: Assembly Manual (14 pages)
Print Page
Basic Usage Tips
1.
Position stand in lowest height
3.
Match the openings in the top arm with the
VGA outlet on your iPad®.
5.
For document camera function use the rear camera of your iPad .
7.
Launch camera app and adjust the Top Arm to the desired height by depressing
the valco clip and sliding the Adjustable Tube Assembly up/down. up/down.
Hold on to Top Arm during adjustment
to prevent any sudden drops
9.
By rotating the top arm 90 degrees, change between landscape and portrait
projection.
®
Valco Clip
DCS5 DCS6 - Version A - Released October 30, 2020 - Copernicus Educational Products Inc.
2.
®
Place your iPad into the stand.
(See point 3 & 4)
If your case has a flip cover, make
sure it's open to the side.
4.
®
™
Place your iPad or iPad mini into the Top Arm.
Place one side first
Slide the moving part out
6.
®
Use Apple VGA Adapter to connect your iPad® to your projector.
8.
The Provided template helps locate your 8.5" x 11" paper without looking
through the camera. (Optional)
10.
By tilting down the top arm, switch between document camera and
tablet stand position.
Place your iPad® and let go
Use the provided VGA Strap to hold
your VGA Adapter in place and stop
it from being disconnected.
(please refer to step 5)
13