Highnovate RAFA Manual - Page 4

Browse online or download pdf Manual for Safety Equipment Highnovate RAFA. Highnovate RAFA 4 pages. Roof access fast anchor

Print Page

RAFE SAFETY CHECK AND MAINTANANCE

The RAFA should be stored in a dry and cool place.

Always check the RAFA before and after usage.

The sliding beam, the legs joints and the lever should all

move freely.

If there is any severe damage to the metallic parts or any

signs of rust or corrosion, stop using the anchor immediately

and contact Highnovate Distributor for instructions.

Clean the RAFA from dirt, sand or mud with a wet cloth and

dry thoroughly before storage. If there is still dirt in the

moving parts use air pressure to remove it.

Do not disassemble the anchor without getting permission

and training from Highnovate.

If any signs of significant wear appear on the legs rubber

pads, replace it before using the anchor again. A

replacement kit is available from Highnovate.

RAFA

ROOF ACCESS FAST ANCHOR

Rappeling on the Anchor

Use the RAFA like any

other anchor, connect a

carbiner and belay or

rappel from the anchor

Place the anchor in line

with the direction of load

to be applied to it.

The anchor is designed for

one person and for a single

rope. If you need a second

rope use another anchor.

Specific training for the

RAFA is available, contact

Highnovate for details.