HighPoint R1108 Series Quick Installation Manual - Page 3
Browse online or download pdf Quick Installation Manual for Controller HighPoint R1108 Series. HighPoint R1108 Series 6 pages. Replacing the thermal silicone
Also for HighPoint R1108 Series: Quick Installation Manual (10 pages), Quick Installation Manual (10 pages)
Print Page
Replace the thermal silicone
The following procedure uses the SSD7540 for reference.
Step 1 On the rear of the SSD7540, remove the six screws that secure
the unit's heat sink to the PCB.
Step 2 Inner side of heat sink: Starting from the bottom left-hand
corner, gently but firmly lift the edge of the silicone sheet and
pull it away from the surface of the heat sink. Repeat for the
second silicone pad.
3