Emerson FB2200 Field Replacement Manual - Page 6

Browse online or download pdf Field Replacement Manual for Industrial Equipment Emerson FB2200. Emerson FB2200 16 pages. Flow computer i/o terminal board
Also for Emerson FB2200: Field Replacement Manual (8 pages), Field Replacement Manual (14 pages), Field Replacement Manual (8 pages), Field Replacement Manual (16 pages), Field Replacement Manual (16 pages)

Print Page
Emerson FB2200 Field Replacement Manual
7.
Set the tilt angle of the panel for maximum solar exposure. (See
Removing/Replacing the Solar Controller
UL Listed Field Installed Accessory Kit for Use in Class I, Division 2, Groups A, B, C, and D
Flow Computer Solar Controller Field Installed Accessory Kit Part No. 396992-01-3 for Use
with UL Listed Class I, Division 2, Groups A, B, C, D Model Series FB2100 and FB2200.
For the 30W solar panel option with an external solar controller (charger/regulator) purchased
through Emerson, connect the external solar controller to the flow computer battery. If you are
using your own external solar controller, follow the manufacturer's instructions.
1.
If you are using a new solar controller from Emerson, it comes with plastic mounting feet
used only for surface mounting applications. Remove the mounting feet but save the lock
nut.
2.
The solar controller also comes with fork connectors.
1
2
3.
Remove the fork connectors and trim back the insulation on the wires ¼ inch.
4.
Remove the junction box cover. Use a utility knife to remove the knock-outs (Item 2) in the
junction box (Item 1) and feed the wires from the solar controller into the junction box, and
through the solar controller lock nut (Item 3).
FB2100/FB2200 Flow Computer 30W Solar Panel Field Replacement Guide
Solar controller
Fork connectors
D301824X012
November 2020
Setting the Tilt
Angle)
3