HighPoint SSD7103 Installation Manual - Page 9

Browse online or download pdf Installation Manual for Controller HighPoint SSD7103. HighPoint SSD7103 11 pages. Linux ubuntu desktop 19.10
Also for HighPoint SSD7103: Installation Manual (11 pages), Installation Manual (11 pages), Installation Manual (15 pages), Installation Manual (12 pages), Installation Manual (12 pages), Installation Manual (12 pages), Installation Manual (13 pages), Installation Manual (11 pages), Quick Installation Manual (9 pages), Installation Manual (12 pages)

HighPoint SSD7103 Installation Manual
SSD7103 Linux CentOS7.7 Installation Guide
j.
Open source driver needs to be installed after system installation.
http://highpoint-tech.com/USA_new/series-ssd7103-download.htm
Run the .bin file to install the driver package.
# sh hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin
k. Follow the prompts to complete the driver installation.
l.
After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.
There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver
status and send control commands to the driver.
Note
The file name is the SCSI host number allocated by OS. If you have no other SCSI cards
installed, it will be 0. In the following sections, we will use x to represent this number.
Using the following command to show driver status:
# cat /proc/scsi/hptnvme /x
This command will show the driver version number, physical device list and logical device
list.

4 Installing RAID Management Software

HighPoint RAID Management Software is used to configure and keep track of your hard
disks and RAID arrays attached to
software is optional but recommended.
Please refer to HighPoint RAID Management Software documents for more information.

5 Rebuilding Driver Module for System Update

When the system updates the kernel packages, the driver module hptnvme.ko should be
built and installed manually before reboot.
Please refer to the REAME file distributed with HighPoint
on how to build and install the driver module.
SSD7103
controller. Installation of the management
open source package
SSD7103
- 7 -