Maico 0084.0361 Installation And Operating Instructions Manual - Page 7
Browse online or download pdf Installation And Operating Instructions Manual for Fan Maico 0084.0361. Maico 0084.0361 16 pages. Er ec covers for er ec flush-/surface-mounted exhaust air systems (according din 18017-3)
Print Page
WARNING Risk of injury and risk to
health from parts which may affect the ventil-
ation system which are added or modified at a
later date.
Parts (range hood, air-ventilated fireplace etc.)
which are added or modified at a later date may
result in health risks and operation which is not
permitted. Parts may only be added or modified
at a later date if system compatibility is estab-
lished/ensured by a planning office. If using an
exhaust air range hood or air-ventilated fireplace,
this must be accepted by a regional master chim-
ney sweep.
WARNING Risk of injury and health risk
in the event of changes or modifications or if
components which are not permitted are
used.
The unit may only be operated with original com-
ponents. Changes and modifications to the units
are not permitted and release the manufacturer
from any guarantee obligations and liability, e. g.
if the housing is drilled at a point which is not
permitted.
CAUTION Exercise caution when hand-
ling packaging materials.
Observe applicable safety and accident preven-
tion requirements.
Store packaging material out of the reach of chil-
dren (risk of suffocation).
7 System and product informa-
tion
7.1 Certificates of approval
Certificates of approval on request.
7.2 ER EC covers
For ER EC cover components: Overview of ER
EC system [} 4].
• All covers with exhaust air filter. Trouble-free fil-
ter change without tools.
• It is possible to rotate the cover by ± 5° to com-
pensate for housings which have been fitted at
an angle.
• ER-AH and ER-AB are barrier-free products. In
automatic mode, they switch the fan automatic-
ally on and off.
7 System and product information
ER-A cover
• Standard model
• Air volume 30 m³/h, 60 m³/h
• Filter change indicator via TimeStrip ( → title
page).
The TimeStrip for the ER-A standard cover
is visibly attached to a location of your choice
(e.g. next to the unit) after the filter change
interval has elapsed, it can be disposed of in
the domestic waste. Do not affix the TimeStrip
under the cover. New TimeStrips are included
in the scope of delivery of the exchange air fil-
ter.
ER-AK cover
• Comfort version with time module.
• With operating parameters that can be set. Set-
ting via touch operating elements.
• Air volume 30 m³/h, 60 m³/h according to fact-
ory setting. Further volumetric flows that can be
set:
Base load 20, 30 or 40 m³/h, 60 m³/h or 100 m³/
h, full load 20 m³/h, 30 m³/h, 40 m³/h, 60 m³/h or
100 m³/h.
• Start delay, overrun time and interval mode can
be set.
• Filter change is indicated by LED.
ER-AH cover
• Model with humidity control and time module
(like ER AK).
• Barrier-free product. In automatic mode the
units switch on automatically when the humidity
value limit is exceeded and switch off again
after the humidity has been reduced.
• Filter change is indicated by LED.
ER-AB cover
• Model with motion detector and time module
(like ER AK).
• Barrier-free product. In automatic mode the
units switch on automatically without a start
delay if motion is detected. If no further motion
is detected, the units switch off after 2 minutes
plus the overrun time.
• Filter change is indicated by LED.
7