HighPoint SSD7540 Installation Manual - Page 15

Browse online or download pdf Installation Manual for Controller HighPoint SSD7540. HighPoint SSD7540 19 pages. Using nvme raid aics with the dell precision 3930 rack workstation
Also for HighPoint SSD7540: Quick Installation Manual (9 pages), Installation Manual (15 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (12 pages), Installation Manual (16 pages), Quick Installation Manual (11 pages), Quick Installation Manual (6 pages), Using Manual (19 pages)

Print Page
HighPoint SSD7540 Installation Manual
HighPoint NVMe Boot RAID Windows Installation Guide

Trouble shooting

No supporting host adapter is found

In the UEFI environment, run the command, " go.nsh (Please see UEFI Read me for specific
.
input content.)"
Solutions: If you get the message, "No supporting host adapter is found. "Try the following,
a. The error message is to remind the user that when the card cannot be found in UEFI. Make
sure the NVMe product is installed into a PCIe slot with x8 or x16 lane.
b. In order to avoid this slot is broken, so replace the slot and test again.

No supported controller detected

In the UEFI environment, run the command, "ArrayCreate.efi".
Solutions: If you get the message, "No supported controller detected." Try the following,
a.
Check whether the Storage option ROM is Enabled in the motherboard BIOS.
b.
Check whether NVMe is connected to the controller.
c.
Replace the motherboard slot, enter the UEFI environment and re-enter the command.
If none of the above methods work, please provide
using our
Online Support
possible.
Portal, include a description of the problem in as much detail as
15
UEFI
log. You can submit a support ticket