HighPoint SSD7749E Installation Manual - Page 7

Browse online or download pdf Installation Manual for Controller HighPoint SSD7749E. HighPoint SSD7749E 19 pages. Nvme boot raid windows
Also for HighPoint SSD7749E: Quick Installation Manual (8 pages)

Print Page

HighPoint NVMe Boot RAID Windows Installation Guide

How to install Windows to the NVMe product

Method 1 UEFI Command Line (RAID Tool)

Step 1 - Preparing the USB Flash Drive

When preparing the USB flash dive, make sure to format the USB partition as FAT32. If another

file system is used, the USB drive may not be properly recognized, and will not appear as an

option under the motherboard's UEFI BIOS menus.

Step 2 - Preparing the UEFI Package

The package must be unzipped directly to the root of the bootable USB flash drive (do not extract

the contents to a new folder). All of the following items must be present in the root of the USB

flash drive.

Example screenshot

Note:

the picture is only for reference, please make the object as the standard.

Note:

If the above content is not present in the root directory, the UEFI boot device will

not be properly recognized, and or you will be unable to create an array for OS

installation.

Step 3 – Creating the RAID Array

Note:

RocketAIC 7505HW series, RocketAIC 7540HW series and RocketAIC 7749EW series NVMe drives

are already pre- configured with RAID0. You can skip this step. If you want to use another type of RAID for

Boot-RAID, you can refer to the following steps.

a. This procedure assumes you have already installed NVMe SSD's into the NVMe product.

(please see Step 1- Prerequisites).

b. Insert the bootable USB flash drive into the motherboard and boot the system.

c. Enter the motherboard's BIOS settings, and select the UEFI: "flash drive" from the menu.

d. At the prompt, enter the following command to change the resolution:

mode 100 31