DynaVox Maestro Quick Start Manual - Page 7

Browse online or download pdf Quick Start Manual for Touch Panel DynaVox Maestro. DynaVox Maestro 20 pages.

Print Page

Maestro Quick Start Guide

OTE

The touch screen may show "image persistence" if the same image or page

is displayed for four (4) consecutive hours or longer. The visual artifacts

may or may not be noticeable or distracting. They will not cause permanent

damage to the touch screen.

The Series 5 software provides settings and tools to prevent image

persistence. To learn more, launch the Searchable Help and perform a

keyword search on "backlight timeout."

Installing The Battery

Your Maestro came with one of two battery options:

•

Slim battery - provides ~3 hours of continuous use

•

Extended battery - provides ~9.5 hours of continuous use

OTE

These times may vary for actual use.

To install the battery:

1. Lay the Maestro face down on top of a soft cloth on a flat surface.

OTE

Before you install the battery, write down the serial number shown on the

back of the Maestro (use the space provided in the How to Get Additional

Help section in this Quick Start Guide). You will need this serial number in

case you need to contact DynaVox Technical Support.

2. Make sure that the 2 battery buttons (p. 5, #9) are in the "outside"

(unlocked) position.

3. Place the battery in the battery well, lining up the small horizontal lines on

the battery with those on either side of the battery well.

4. Slide the battery "up" (towards the front of the Maestro). Make sure that

the battery is in complete contact with the Maestro, along the entire front

wall of the battery well.

5. While holding the battery securely in this position, slide the 2 battery

buttons to the "inside" (locked) position.

After you install the battery, you should charge your Maestro for the time interval

shown below:

•

Slim battery - charge for 2 hours

•

Extended battery - charge for 4 hours