HighPoint RocketStor 6314A Setup Manual - Page 3

Browse online or download pdf Setup Manual for Enclosure HighPoint RocketStor 6314A. HighPoint RocketStor 6314A 9 pages. Thunderbolt 2 hardware raid 4-bay storage enclosure
Also for HighPoint RocketStor 6314A: Setup Manual (14 pages), Quick Installation Manual (13 pages)

Print Page

Install/Update Drivers on existing operating systems

Drivers for RS6318A are already embedded in the latest Mac OSX (10.9 and later), and installing

drivers is unnecessary. If you previously uninstalled the drivers, or wish to update your current

drivers, follow the instructions below.

HighPoint Mac Drivers have file extension .dmg; make sure the file extension for the files you

downloaded are the same.

1. Obtain the latest driver online at product software download page:

RocketStor 6314A

http://www.highpoint-tech.com/USA_new/series-rs6314a-download.htm

RocketStor 6318A

http://www.highpoint-tech.com/USA_new/series-rs6318a-download.htm

2. Once downloaded, locate the folder you downloaded the driver to and double click on the

file named "HighPointIOP_Mac_###.dmg"Note: File name varies, but extension is .dmg.

3. The file will be mounted onto the operating system, click on HighPointIOP.pkglocated on

your desktop

4. Follow the on-screen instructions.

5. Reboot computer

6. Make sure Driver Installed isYes

After rebooting, check system report again to confirm you have the RocketRAID 4520 SAS

Controller installed.

Uninstall Drivers

To uninstall the drivers, follow the procedure below:

1. Double click on "HighPointIOP_Mac_106_####.dmg" Note: File name subject to change,

make sure extension is .dmg.

2. Double click on uninstall.command

3. A terminal window will pop up prompting you to type in your administrator password.

Type in your administrator password to uninstall.

4. Reboot