Gallien-Krueger Legacy 500 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Amplifier Gallien-Krueger Legacy 500. Gallien-Krueger Legacy 500 10 pages.

Print Page
Gallien-Krueger Legacy 500 Owner's Manual
1
AC INPUT
100 - 240, 60/50 Hz
FUL L POW ER : 1040 W
F UL L POWE R : 104 0 W
AV E RAGE POWE R : 143 W
AVER AG E POWER : 143 W
THIS PRODUCT IS MANUFACTURED UNDER
THIS PRODUCT IS MANUFACTURED UNDER
U.S. PATENT # 8,985,792 AND OTHER PATENTS PENDING.
U.S. PATENT # 8,985,792 AND OTHER PATENTS PENDING.

Rear Panel Features

1
AC Input: The detachable power cord
attaches here.
2
Power Switch: Turns the unit on and off.
*This does not disconnect the mains
power.
3
Pin 1 Lift: Lifts or grounds pin 1 of the
direct output.
Direct Out: Balanced XLR output for
4
direct connection to P.A. or recording
console.
5
Source: Selects the signal sent to the direct
output to be before or after the EQ
controls.
6
Phones: 3.5mm output for headphones.
Aux In: 3.5mm input for external
7
playback device such as an MP3 player.
8
Tuner: ¼" unbalanced output for a tuner.
This output is active at all times, even
when Mute is selected on the front panel.
9
Foot Sw: ¼" unbalanced input for RF-I
footswitch. Allows the Overdrive function
to be activated remotely. *Overdrive
switch on the front panel must be in the up
position for the footswitch to function.
Return: ¼" unbalanced input for outboard
10
effects devices.
L E G A C Y S E R I E S
L E G A C Y S E R I E S
2
3
4
5
BALANCE OUT
PHONES
DIRECT OUT
POWER
ON
PIN 1
SOURCE
LIFT
PRE
GND
POST
AUX IN
OFF
7
6
8
10
PATCH BAY
TUNER
RETURN
(8+4)
(8+4)
4 or 8
4 or 8
(4+4)
(4+4)
FOOT SW
SEND
CABINET
IMPEDANCE
7
9
11
12
Send: ¼" unbalanced output from the
11
preamp for connecting outboard effects
devices.
Cabinet Impedance: Selects the attached
12
speaker load (500 and 800 watt models
only) *see page 8 for recommended
speaker loads.
Speaker Outputs: Twist-lock connectors
13
for connecting speaker cabinets.
13
SPEAKER
450 WATTS @ 2.7Ω
450 WATTS @ 2.7
300 WATTS @ 4Ω OR 2Ω
300 WATTS @ 4
Ω OR 2Ω
190 WATTS @ 8Ω
190 WATTS @ 8Ω
CLASS 2 WIRING
CLASS 2 WIRING