Gallien-Krueger Micro Lead series Operating Instructions Manual - Page 6
Browse online or download pdf Operating Instructions Manual for Amplifier Gallien-Krueger Micro Lead series. Gallien-Krueger Micro Lead series 8 pages. Micro lead series
Print Page
Accessories
There are a variety of accessories for the ML/S and
ML/E Heads and Combos, each designed to blend
perfectly with the Microamplifier Series.
Footswitches
For the ML/S
With the addition of the RF2 Foot Control, you can
take control of Channel Switching(Lead/Clean) and
Boost (On/Off) with a tap of your toe. A standard
1/4'' phone stereo cord is included for hookup to the
ML/S.
For the ML/E
The RFG4 Foot Control is designed to gives you
control over five functions in the ML/E. Channel
Switching
(Lead/Clean),
Boost(On/Off)
Compressor (On/Off), Reverb(On/Off), and Chorus
(On/Off). A standard 5-pin DIN(MIDI) cable is
included for hookup to the ML/E.
Specifications
Max Input :
1.4Vrms
Output :
70W into 8 per channel (stereo)
140W into 4 (mono)
@less than 1% THD
Headphones :
1.4Vrms max into 8 (.25watt)
Signal to Noise Ratio: >74dB (Clean Channel referenced to max input;
EQ flat)
Input Sensitivity :
(Clean Channel) 1.8m Vrms @1KHz
Return Sensitivity :
.46Vrms@1KHz
Active Equalization :
±15dB @ 80Hz
±18dB @ 800Hz
±16dB @ 4.0kHz
±12dB @ 10kHz
Shape :
Cut @ 560Hz (up to -14dB)
Input Impedances :
Input.........................................1M
Return (ML/S)..........................12K
Return (ML/E)..........................22K
Stereo Aux Input (ML/E)...........12K
VCV
Recording Compensation Module
For recording directly from your Microamplifier,
simply plug in the VCV(Vintage Cabinet Voicing)
Module. It fits easily into the Effects Loop and has
two
switchable
settings.
Headphones, Speaker Outputs, and Stereo Balanced
Outputs (ML/E) are affected by the VCV.
It is also recommended for use with small speakers
and when using headphones.
Rack Mounting Kits
All ML/S and ML/E Heads and Combos can be
rack mounted with the addition of our optional rack
mounting kits.
All Heads : GK Part #304-1005-0
112 Combos : GK Part #304-1065-A
208 Combos : GK Part #304-1025-0
206 Combos : GK Part #304-1077-0
or
Mic Stand Kit
The 206 combo can be mounted on a standard mic
stand with the addition of a Mic Stand Mounting
Kit. (Order GK Part #304-1080-0)
The
Line
Outs,
Road Bags
To keep your amp looking it's best, we offer custom
fitted Road Bags for every model. They feature a
fully padded lined interior with a shell made of
Cordura Nylon. Cordura is waterproof, colorfast,
self-healing and grease resistant. There is also a
front zipper pocket for your cords and footswitches.
An adjustable shoulder strap lets you carry your
amp and instrument together easily.
They are recommended for unracked traveling pro-
tection.
(2 rack spaces)
Note : Accessories are subject to availability. Ask
(10 rack spaces)
your Gallien-Krueger dealer about specific items.
(8 rack spaces)
(7 rack spaces)
Output Impedances :
Send......................................470
Line Out ..................................1K
Compressor (ML/E) : 2:1 Compression Ratio w/margin of 3
Chorus (ML/E):
Crossover Filter : 6dB/oct @340Hz
Modulation Rate : .35Hz-2.4Hz
Maximum Width (delay time) : 17.5ms - 22.5ms
Reverb (ML/E) :
Electronic Analog Type with Stereo Outputs
(multi-tap bucket brigade)
Dimensions :
Heads:13.75''W x 1.9''H x 7''D (7.2lbs)
206 combo: 13.75''W x 10.25''H x 7.75''D (23lbs)
208 Combo: 17.20''W x 14''H x 10.50''D (36lbs)
112 Combo: 17.20''W x 16''H x 10.50''D
(32lbs : Celestion
Footswitch :
ML/S: GK model RF2 and standard
3-connector stereo cord (1/4''plugs)
ML/E:GK model RFG4 and standard
5-conductor cord with 5-pin DIN connectors
(MIDI type)
Block Diagram
/ 40lbs : EV )