HighSecLabs FI11H-M Quick Setup Manual - Page 5
Browse online or download pdf Quick Setup Manual for Network Hardware HighSecLabs FI11H-M. HighSecLabs FI11H-M 8 pages. Secure kvm isolators
SECTIONS
Table of Contents
InSTALLATIOn
Step 2 – Connect the peripherals to the Isolator's CONSOLE SIDE:
1. Video connection: for all models, connect the monitor/projector's
cable to the Isolator's VIDEO OUT port.
2. PC keyboard and mouse connection: for fI11D-M, fI11H-M, and
fI11PH-M models, connect a USb mouse and keyboard, to the
Isolator's corresponding MOUSE and Kb ports.
both mouse and keyboard (HID) LEDs should light continuously.
Note: If either LED remains Off, the Isolator does not recognize the
device; use an alternative device.
HSL Secure KVM Isolators Quick Setup Guide
1
2
Step 3 – Power ON the Isolator
1. for all models, connect the power adapter to the Isolator's PC SIDE,
DC In port.Power On the Isolator by plugging it into an AC wall
outlet.
2. The PC SIDE Power LED should light continuously. If not, check the
connections.
Step 4 – Make sure the PC and display are powered ON
KB/Mouse
HID LEDs
KB/Mouse
USB Port
3
EDID Lock
Video Out
EDID LED
4