HighSecLabs FVCE11PH-M Quick Setup Manual - Page 7

Browse online or download pdf Quick Setup Manual for Network Hardware HighSecLabs FVCE11PH-M. HighSecLabs FVCE11PH-M 9 pages. Secure kvm extenders
Also for HighSecLabs FVCE11PH-M: Quick Setup Manual (10 pages)

Print Page

SECTIONS

Table of Contents

INSTALLATION

Step 4 - Power ON the Isolator Extender

1. For all models, connect the power adapters on

both the Isolator Extender Transmitter and

Receiver at the PC SIDE, DC IN port.

Power ON the unit by plugging it into an AC

wall outlet.

2. The PC SIDE Power LED should light

continuously. If not, check the connections.

Step 5 - Make sure the connected PC on the

Transmitter side and Display or Projector on

the Receiver side are powered ON.

Secure Extended Isolators Quick Setup Guide