Gallo A'DIVA Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Speakers Gallo A'DIVA. Gallo A'DIVA 12 pages.

Print Page
STEREO AND 2.1
When using A'Diva loudspeakers in a
stereo or 2.1 system, employing a suitable
crossover or filter will allow you to get
the best performance from the speakers
whilst protecting them from the lowest
frequencies. If a crossover is not used,
then you must limit the volume or use a low
power amplifier to ensure that permanent
damage to the loudspeakers is avoided.
Using speaker cables, connect the
•
speaker outputs on your stereo amplifier
to the high level inputs on the subwoofer.
Run a second set of speaker cables from
•
the high level outputs on the subwoofer
to your loudspeakers.
On the subwoofer adjust the crossover to
•
around 100hz.
When music is playing, you can adjust
•
the level control to match the subwoofer
and loudspeaker volume.
Consult your subwoofer owner's guide for
more detailed set up instruction.
MULTI-CHANNEL AND HOME CINEMA
When using a multi-channel surround
sound system, first ensure that you are
familiar with your amplifier's functions, to
ensure that the correct mode and settings
are applied.
Using speaker cables, connect the
•
speaker outputs from your AV Amplifier
to the A'Diva loudspeakers, ensuring that
each channel goes to the relevant speaker.
On the AV Amplifier, select a small
•
speaker setting, or manually set the
crossover point to approximately 100hz.
Consult both your subwoofer and AV Amplifier
owner's guides for more detailed set up
instructions.
7