Highway The Wizard Manual - Page 3
Browse online or download pdf Manual for Security System Highway The Wizard. Highway The Wizard 6 pages. Work zone alert and information radio
Print PageSet The Wizard to Broadcast
Automatically
Set "MODE" switch to "TRANSMIT"
.
position
Remote Antenna Installation
Construction Site Trailer
If unit is used inside a trailer, external antenna (optional)
may be mounted in any convenient outside location accord -
ing to instructions
Plug lead-in shielded cable to "antenna in" connector.
Operate the system according to all previous instructions.
No personnel should be closer to the antenna than 7 unob -
structed inches.
NOTE: DO NOT OPERATE WITHOUT A PROPERLY
CONNECTED AND LOCATED ANTENNA !
Power Panel Indicators
There are two light bar
indicators that provide
dynamic strength infor -
mation
Meters
The "VOLTS" bar indicates the
level of DC power being provided to
the unit. It should read about 12V for proper operation
.
The "ACTIVITY" bar gives an indication of how frequent and strong the
signals are that are being received by the CB. Distant transmissions (weak
signals) will not cause the system to interpret the channel as being busy.
CB Microphone Operation
Operator Communication
The "Microphone" may be used if
desired for live communications
Rotate "MODE" switch to "STD CB"
Page 10
Contents
Elimination of licensing .............................................4
Rules You Should Know .............................................4
Easy to Operate ......................................................5
Operation ...............................................................6
If the Transceiver is placed Indoors...........................6
If the Transceiver is placed Outdoors ........................6
Select power source .............................................6
12 volt operation .............................................6
Initial Set-up.........................................................6
Message Set-up ...................................................7
To Record A Message
To Listen and Confirm Recorded Message(s).........7
Transmit Set-up ...................................................7
CB Channel Selection .......................................8
To Designate Working Channels ........................8
CB Broadcast Message ....................................9
To Confirm Complete Setup ..............................9
Set The Wizard to Broadcast Automatically .........10
Remote Antenna Installation .................................10
Construction Site Trailer .................................10
Power Panel Indicators .......................................10
Meters .........................................................10
CB Microphone Operation ....................................10
Operator Communication .................................10
Enclosure .........................................................11
General Specifications ....................................11
....................................7
Page 3