Agrowtek RX1i Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Relays Agrowtek RX1i. Agrowtek RX1i 6 pages. Digital intelligent outlet relay

Print Page

Technical Information

Relays are not activating, no power LED on PCB

Ensure the relay is plugged into 120VAC outlet and the power is on to the outlet.

Relays are clicking but no power to an outlet

Check the status LED to determine if AC power is reaching the line terminal of the receptacle. The red LED is

passed through the relay to the terminal. If the status LED for the receptacle is on, check the equipment by

bypassing the relay.

Maintenance & Service

Exterior Cleaning

Exterior may be wiped with a damp cloth wish mild dish detergent, then wiped dry. Disconnect power be-

fore cleaning the enclosure to prevent electrical shock.

Fuse Replacement

There are no fuses or servicable components inside the RX1i. Do not open the enclosure.

Storage

Store equipment in a clean, dry environment with ambient temperature between 10-50°C.

Disposal

This indsutrial control equipment may contain traces of lead or other metals and environmental contami-

nants and must not be discarded as unsorted municipal waste, but must be collected separately for the

purpose of treatment, recovery and environmentally sound disposal. Wash hands after handling internal

components or PCB's.

Agrowtek Inc. warrants that all manufactured products are, to the best of its knowledge, free of defective material and workman-

ship and warrants this product for 1 year from the date of purchase. This warranty is extended to the original purchaser from the

date of receipt. This warranty does not cover damages from abuse, accidental breakage, or units that have been modified, altered,

or installed in a manner other than that which is specified in the installation instructions. Agrowtek Inc. must be contacted prior to

return shipment for a return authorization. No returns will be accepted without a return authorization. This warranty is applicable

only to products that have been properly stored, installed, and maintained per the installation and operation manual and used for

their intended purpose. This limited warranty does not cover products installed in or operated under unusual conditions or envi-

ronments including, but not limited to, high humidity or high temperature conditions. The products which have been claimed and

comply with the aforementioned restrictions shall be replaced or repaired at the sole discretion of the Agrowtek Inc. at no charge.

This warranty is provided in lieu of all other warranty provisions, express or implied. It is including but not limited to any implied

warranty of fitness or merchantability for a particular purpose and is limited to the Warranty Period. In no event or circumstance

shall Agrowtek Inc. be liable to any third party or the claimant for damages in excess of the price paid for the product, or for any

loss of use, inconvenience, commercial loss, loss of time, lost profits or savings or any other incidental, consequential or special

damages arising out of the use of, or inability to use, the product. This disclaimer is made to the fullest extent allowed by law or

regulation and is specifically made to specify that the liability of Agrowtek Inc. under this limited warranty, or any claimed exten-

sion thereof, shall be to replace or repair the Product or refund the price paid for the Product.